|
|
|
|
| Desired Industry: Engineering |
SpiderID: 28268 |
| Desired Job Location: Hampstead, Maryland |
Date Posted: 8/17/2009 |
| Type of Position: Full-Time Permanent |
Availability Date: 9/15/2009 |
| Desired Wage: |
|
|
U.S. Work Authorization: Yes |
| Job Level: Experienced with over 2 years experience |
Willing to Travel: Yes, Less Than 25% |
| Highest Degree Attained: Other |
Willing to Relocate: Undecided |
Objective:
Dear Sir,
Please find-attached resume, I'm actively looking for an interesting position in engineering as a RF Senior Technician. I have over 40 years experience in electronics. If interested in my qualification, please call me at 410-374-9054 or email me at rsenior1@live.com Yours Truly,
Ronald Senior
Experience:
EXPERIENCE
SAIC
Abingdon, MD.
Senior Electrical Engineer. May 2007 to July 2009
Assigned to a team to develop a new brass board. The new product will be used for biological chemical detection. Testing new concepts, soldering and fabrication. Ordering components as needed. Keeping a Lab notebook and stocking Lab as needed. Also troubleshooting as needed.
Built prototypes, which were successfully tested at an approved Lab for chemical detection.
PCTEL
Germantown, MD.
Associate Hardware Engineer. April 2006 to Nov 2006
Responsible for Hardware Lab and all aspects of LX 2 scanner used to analyze cell towers.
Find component substitutes that are RoHS compliant. Solder SMD components as needed.
Test and Troubleshoot using Oscilloscopes, Signal Generators, Network Analyzer, RF Probe,
Spectrum Analyzers, RF Power Meter, DVM’s and Lab Power supplies. Order Lab Supplies as needed.
Engineering Vision and Innovation EDO/EVI
Columbia, MD
Senior Technician, Engineering. Jan 2005 to March 2006
Layout PC BD using P-Cad, as well as Schematic Capture for prototypes. Tested and did troubleshooting as needed on electronic analog and RF Boards. Operated a Pick and Place machine and Probe stations. Solder SMD parts, fine pitch.
Johns Hopkins University APL
Laurel, MD.
Engineering Assistant, Space Dept. SER, Communication Lab. March 2002 to Jan 2005
Tested and tuned prototypes, as needed, for spacecraft designs on New Horizons, Stereo and, Messenger.
Used Cadence OrCad to capture schematics and layout printed circuit boards. Soldered Surface Mount Devices and parts and fine pitch; performed tests and made necessary changes to meet design goals of the prototypes. Ordered engineering kits and components as needed for projects. Plotted data and write overview of performance. Types of designs are primarily RF. Designed and built test equipment for flight circuits and ground support equipment using frequencies up to 8 GHz. Responsible for all aspects of the Engineering Lab, including equipment calibration. Worked Satellite tracking station 60-foot dish for the MSX spacecraft. Fabricated RF Cables and Harnesses as needed for environmental testing, Thermal Vacuum and Vibration are typical test.
RONALD F. SENIOR (continued) PAGE 2
ANADIGICS INC.
Warren, NJ
Senior Electronics Technician Advanced Engineering Development Group. 1998 to June 2001
Layout from Schematics, printed circuit boards using CAD program, Protel. Export Gerber files to X Y milling machine. After making Board, solder SMD parts and test performance and make necessary changes to meet design goals. Order engineering kits and components as needed for projects. Plot data and write overview of performance. Types of designs were RF. Purchased all required equipment and assembled a test station for fiber optic modulator evaluation.
LOCKHEED MARTIN CORP.
Newtown, PA
Senior Technician RF, Communications/Engineering Technician 1989-1998
Assigned to Manufacturing Test after transferring from the Engineering Department. Tested, tuned, aligned and trouble shoot to component level Satellite Receivers, Transmitters SSPA‘s, linearizer TWTAs, and tuned microstrip for performance specifications. Frequency range up to 20 GHz. Also responsible for the building and testing of prototypes for design reviews. Assisted with the design of special test equipment to include noise figure, phase noise, group delay, spurious harmonic radiation, IMD, NPR, and EMI. Also performed Auto testing using computer to control testing and Environmental testing such as thermal vacuum and vibration per customer requirements. Some test equipment utilized included HP 8510 Network Analyzer, Spectrum Analyzer, Signal Generators, and Oscilloscopes. Assisted Jr. Technicians with troubleshooting and setups.
ICI AMERICAS INC., AEROSPACE DIV.
Valley Forge, Pa.
Senior Electronic Engineer 1984-1988
Product engineer for D/Tech electronic article surveillance systems, which operated from 900 MHz to 1800 MHz. Responsible for all aspects, such as assembly procedures. Design of new or improvement of existing products, such as audible alarms, power supplies and displays. Have taped artwork for PC boards. Worked closely with our development engineering to transfer new products into production Drawings as needed for product lines. Also worked with field service
group on new products. Made all necessary drawings as required. Reviewed incoming inspection reports, worked with purchasing as needed to find an alternate vender or improve lead time/cost, managed final test area, three technicians and all test procedures and ECN's as needed. Used Microsoft Office as needed.
RCA (GE) ASTRO SPACE DIV.
Princeton, NJ
Engineering Technician, Receiver Design Group 1983-1984
Helped on development of 17/12 GHz. Communication Receiver used on DBS Satellite. Did lab testing grafts of data on computer and tuning and alignment of prototypes also helped with production units into manufacturing. Organized design review data for pubs. Built special test equipment as needed for manufacturing. ESD, NASA Soldering, Mate-De-mate, Clean Room cert
RONALD F. SENIOR (continued) PAGE 3
TELEDYNAMICS DIV. UNITED TECHNOLOGY CORP.
Fort Washington, PA
Design Engineer, RF Group 1973-1983
Developed and improved new products and improved existing procedures. Tested and aligned prototypes to meet requirements of customer's specifications, such as IRIG. Products included telemetry transmitters and receivers in the 2.2-2.3 GHz. S-band; frequency synthesizer at 110MHz; and power amplifiers up to 50 Watts.
Transferred products through to manufacturing. Some programs worked on included Lockheed Trident, Rockwell's Space Shuttle, Martin Marietta's Titan III, the Navy's Anti-Submarine System, and IR Video Type Transmitter used on the Air Force Maverick Missile.
NORDEN, DIVISION UNITED TECHNOLOGY CORPORATION
Norwalk, CT
Engineering Aide, Research and Development, Video System 1968-1969
Tested and built many prototype electronic circuits. Worked with engineers on F111 aircraft, heads-up display system prototype, and setting up necessary test equipment. Did trouble-shooting as needed. Worked on the development of the Super Sonic Transport avionics heads up display system.
GENERAL ELECTRIC
Philadelphia, PA
Test Technician, Silicon Power Division 1967-1968
Test and Troubleshoot large power inverter, rectifiers and control switch gear. Used necessary test equipment as needed. Power ranges were from 10KW.To 15MW.
Education:
EDUCATION
PHILADELPHIA WIRELESS TECHNICAL INSTITUTE, Philadelphia, PA
Associate Radio Engineering 1968
INTERNATIONAL CORRESPONDENCE SCHOOLS, Scranton, PA
Diploma TV/Electronics 1973
RADIO RELAY EQUIPMENT REPAIR, Keesler AFB, Mississippi, USAF
Certificate Radio Relay and Special Course on Modulation/time division 1969
Cadence Training School, Sunnyvale CA.
Diploma OrCad Layout and Capture. 2004
Skills:
Equipment Used Certs. Tools
Spectrum Analyzers ESD Milling Machines
Network Analyzers SMD Soldering Hand Tools
Signal Generators FOD Soldering Irons
RF Power Meters Mate De-Mate Drill presses
Bird BERT Analyzer
Oscilloscopes
DVM’S
Noise Figure Meters
DC Power Supplies
Mixers
Directional Couplers
Splitters
Lab Amps
RHG and Microdyne Receivers
Additional Information:
INVENTION
Co inventor on a Miniature Ionization Source. This is Paten pending.
Candidate Contact Information:
TheJobSpider.com has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response. |
|
|
|
|
|